Jump to content
Did you know?
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.



Community Reputation

10 Good


About budude

  • Rank
  • Birthday 02/13/1960

Contact Methods

  • Website URL

Profile Information

  • Location
    San Jose, CA
  • Biography
    will fill in later
  • Interests
    will fill in later
  • Occupation
    Technical Leader at Cisco
  • About my display
    Up until 2008, it was a completely static display - maybe 1000 lights or so. In 2008 I purchased two LOR 1602W units for 32 channels with about 6000 lights. In 2009 I am going more DIY with a Heilx controller which supports 128 channels - this added with my existing LOR controllers.
  1. You will find that the boards are quite easy to build/solder and the build instructions are very clear. You would not be the first to say they think it's too complicated/hard to build these yet 99% of the time things go without a hitch. There are many variations of the Renard boards as well with different channel counts, AC or DC control and wireless as well. A decent soldering iron and small diameter 60/40 or 63/37 leaded solder will get you good results.
  2. I don't have the EP model but I think they are the same as mine. It has L/R RCA/phono jacks for the audio out. This will get you from your PC to the transmitter (you can find longer ones as well): 6-Inch Gold-Plated Y-Adapter Cable, 1/8" Plug to Phono Plugs I also suggest you get the headphone control - it allows fine control of the audio into the transmitter since the PC control can be a bit coarse: Gold-Plated Volume Control Cable for Stereo Headphones Lastly, you may want to look into an isolation transformer if you have any hum which can happen: Ground Loop Isolator You'll need adaptors for these to go from male to female phono jacks. This is what I use for my setup and it's crystal clear.
  3. I do - - but only if they blink!
  4. Anyone using red LEDs for arches ?

    I have separate Red, Green and White CDI LED arches this year - I'd say they are equal brightness and look great!
  5. Credit where credit is due...

    I hear ya brother! I went from 32 channels (2x1602W) to 224 channels (2x1602W, 1xLynxFreeStyle, 4xRenard16) this year and added several new elements, not just additional colors so it's been... fun... But the end result will hopefully be worth it!
  6. can l.e.d.s be cut?

    You could cut strands down and control them via a DC controller with the appropriate voltage. Or you could cut portions out but wire them back in the same position via some zip cord back to the "mother" cord with the rectifier "blobs". I'm guessing though that neither are the option you were looking for...
  7. How do I add a transmittor?

    Instead of running a "Y" from my music source (the PC) I bought a cheap clock radio and hide that in a tree protected from the elements. This serves a couple purposes - first - it allows folks walking by to hear your show (whole point of the "Y" concept) but it also verifies that your transmitter is running! Unless you have a separate radio somewhere you might not have any idea that your transmitter blew up or the output is bad in other ways.
  8. Good way to start animating?

    Or you could go DIY and get a controller for around a $100 and the software (Vixen) is free... just saying... I use both LOR and DIY - the end result is exactly the same...
  9. Chocolate Butter

    AH HAHAHHAHAH - yeah right...
  10. Quad city area anyone?

    My folks still live in Moline - we hit Frank's every time we come out to visit - good stuff! I used to get the Strombolli sandwiches a lot too. I was born in Silvis so we hit that a lot when I was a small one...
  11. I was thinking the same thing - these cameras use IR LEDs to bathe the area with invisible light - why not just find some compatible wave length LEDs to turn on after the show so that it essentially looks like daylight to the camera? Nobody would even see them on and it would be enough for the motion sensing to pick things up better (maybe?).
  12. We CA folks need to stick together - gave your video a boost. Even if someone felt it wasn't the correct theme - at a minimum you get an A for effort and execution - awesome stuff!
  13. I did it!

    Hee Hee - Welcome to the "Heroin Club"! Let me guess - - in less than a week you'll be wishing you had just a few more channels......like 64 or no - maybe 128 - no wait......... Another one hooked - - reel him in!
  14. Snowflakes in Motion.....

    I PM'd for the same thing - I have a case of them sitting in my garage and did not want to just hang them from the eaves of the house but I only have a single-story stucco ranch style house so I can't rely on the house to support them...
  15. Oh Man, I'm one light short!

    Strictly speaking, your controllers have an opto-isolator for each channel which contains an internal IR LED - so you can count those too. How about your transmitter, computer, monitor, etc - - they all have LEDs too... We'll get you to 7000 before too long...:santasmileyitty: