Jump to content
Did you know?
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.



Community Reputation

10 Good


About budude

  • Rank
  • Birthday 02/13/1960

Contact Methods

  • Website URL

Profile Information

  • Location
    San Jose, CA
  • Biography
    will fill in later
  • Interests
    will fill in later
  • Occupation
    Technical Leader at Cisco
  • About my display
    Up until 2008, it was a completely static display - maybe 1000 lights or so. In 2008 I purchased two LOR 1602W units for 32 channels with about 6000 lights. In 2009 I am going more DIY with a Heilx controller which supports 128 channels - this added with my existing LOR controllers.
  1. You will find that the boards are quite easy to build/solder and the build instructions are very clear. You would not be the first to say they think it's too complicated/hard to build these yet 99% of the time things go without a hitch. There are many variations of the Renard boards as well with different channel counts, AC or DC control and wireless as well. A decent soldering iron and small diameter 60/40 or 63/37 leaded solder will get you good results.
  2. I don't have the EP model but I think they are the same as mine. It has L/R RCA/phono jacks for the audio out. This will get you from your PC to the transmitter (you can find longer ones as well): 6-Inch Gold-Plated Y-Adapter Cable, 1/8" Plug to Phono Plugs I also suggest you get the headphone control - it allows fine control of the audio into the transmitter since the PC control can be a bit coarse: Gold-Plated Volume Control Cable for Stereo Headphones Lastly, you may want to look into an isolation transformer if you have any hum which can happen: Ground Loop Isolator You'll need adaptors for these to go from male to female phono jacks. This is what I use for my setup and it's crystal clear.
  3. budude

    Spiral Tree Calculating Spreadsheet

    I just came across this thread - great tool! I was planning to redo my Mega-Midi-Tree this year and these look so much cooler.
  4. budude

    Rgb led tree

    btw - each of the lights (or "nodes" as they call them) in mrpackethead's tree are individually addressable so it's more flexible than CCR. Read more here...
  5. budude

    Rgb led tree

    That would be 'mrpackethead's setup in NZ - you can follow him at DIYC - no cost estimates yet but it's one of those things that "If you have to ask..."
  6. budude

    Anyone using red LEDs for arches ?

    I have separate Red, Green and White CDI LED arches this year - I'd say they are equal brightness and look great!
  7. budude

    Credit where credit is due...

    I hear ya brother! I went from 32 channels (2x1602W) to 224 channels (2x1602W, 1xLynxFreeStyle, 4xRenard16) this year and added several new elements, not just additional colors so it's been... fun... But the end result will hopefully be worth it!
  8. budude

    can l.e.d.s be cut?

    You could cut strands down and control them via a DC controller with the appropriate voltage. Or you could cut portions out but wire them back in the same position via some zip cord back to the "mother" cord with the rectifier "blobs". I'm guessing though that neither are the option you were looking for...
  9. budude

    Multi colored Arches, anyone doing them?

    Mine are a slight variation - - I will have a single color arch each of Red, Green and White - so not multi-colored as you were asking but halfway there!
  10. budude

    How do I add a transmittor?

    Instead of running a "Y" from my music source (the PC) I bought a cheap clock radio and hide that in a tree protected from the elements. This serves a couple purposes - first - it allows folks walking by to hear your show (whole point of the "Y" concept) but it also verifies that your transmitter is running! Unless you have a separate radio somewhere you might not have any idea that your transmitter blew up or the output is bad in other ways.
  11. budude

    Lor 16

    ditto - - I had two 1602Ws (32ch) with about 6000 lights - about 95% LED all off a single 15A GFCI outlet. Won't get away with it this year (224 channels) probably but you should be fine.
  12. budude

    Good way to start animating?

    Or you could go DIY and get a controller for around a $100 and the software (Vixen) is free... just saying... I use both LOR and DIY - the end result is exactly the same...
  13. budude

    Chocolate Butter

    AH HAHAHHAHAH - yeah right...
  14. budude

    Quad city area anyone?

    My folks still live in Moline - we hit Frank's every time we come out to visit - good stuff! I used to get the Strombolli sandwiches a lot too. I was born in Silvis so we hit that a lot when I was a small one...
  15. I was thinking the same thing - these cameras use IR LEDs to bathe the area with invisible light - why not just find some compatible wave length LEDs to turn on after the show so that it essentially looks like daylight to the camera? Nobody would even see them on and it would be enough for the motion sensing to pick things up better (maybe?).