Jump to content
Did you know?
  • The first recorded date of Christmas being celebrated on December 25th was in 336, during the time of the Roman Emperor Constantine. A few years later, Pope Julius I officially declared that the birth of Jesus would be celebrated on that day.
  • Santa Claus's sleigh is led by eight reindeer: Dasher, Dancer, Prancer, Vixen, Comet, Cupid, Dunder (variously spelled Donder and Donner), and Blixem (variously spelled Blixen and Blitzen), with Rudolph being a 20th-century inclusion.
  • Outdoor Christmas lights on homes evolved from decorating the traditional Christmas tree and house with candles during the Christmas season. Lighting the tree with small candles dates back to the 17th century and originated in Germany before spreading to Eastern Europe.
  • That big, jolly man in the red suit with a white beard didn’t always look that way. Prior to 1931, Santa was depicted as everything from a tall gaunt man to a spooky-looking elf. He has donned a bishop's robe and a Norse huntsman's animal skin. When Civil War cartoonist Thomas Nast drew Santa Claus for Harper's Weekly in 1862, Santa was a small elflike figure who supported the Union. Nast continued to draw Santa for 30 years, changing the color of his coat from tan to the red he’s known for today.
  • Christmas 2018 countdown has already begun. Will you be ready???
  • Why do we love Christmas? It's all about the traditions. In this chaotic world we can miss the "good old days." Christmas reminds us of that time.
sparkleball

Observations on Time & Money Required to Wrap a Small Tree in Lights.

Recommended Posts

 

I decided to wrap a 25' Elm tree (Ulmus USDA) in lights for this Christmas.  I had somewhere around zero guidance and zero experience so I decided to write this up for the next guy.  I have seen the occasional tree done up this way and liked it.  On youtube I found Jerry's Tree  (https://www.youtube.com/watch?v=XG_iODz6e7E) which is magnificent.

I went to www.holidayleds.com/ and bought a case of  warm white 5 mm LEDS with brown wire, so as to blend in better with the bark.  I chose warm white as being more cheerful looking.  Cool white would be more wintery and architectural.  Each string has 70 LEDs with a 4" spacing, 70 LEDs per string, 23' lighted length.  I used the palm of my hand as a nominal 4" measure as I wrrapped, so the space from each bulb to its neighbors is the same left and right or up and down.  A case of 24 strings gave me a total of 552' lighted length to work with.  The strings came tightly twisted around themselves to make them as small as possible for shipping.  It took me around 5~10 minutes per string to prep them.  Prepping included:

* Plug in to test. (they all worked)

*Standing on a chair and dangling one end so it could twirl freely while I untwisted it.
*Taping black electrical tape over the white labels.
*Squirting dielectric grease into the female sockets.
*Taping over the lower female socket with electrical tape as additional protection for the socket I thought might not be used.
*Rolling them into a ball with the female end in the middle.
*Tying them up with a wire and boxing them.

I did not pull out the fuses (every string has a 3 watt fuse inside the male plug) and grease them, because they are so small that I hate handling them.

One reason I chose this tree was that it was small enough to wrap without a cherry picker.  I had a 6' stepladder, a 20' extension ladder, no helper.  A helper would have made things go faster, a cherry picker, really faster.  I found that I had to stop around 10' from the end of any given branch because they got too shaky to climb or lean a ladder against.  Work got a little harder as I went along because every time I wrapped another branch I had to stop climbing on it.  I picked October to put the lights up because I didn't want to be up there pushing snow out of the branches while I worked.  I won't put them on until after Thanksgiving, because that would be tacky.  I worked on two consecutive days and it ran around 7 hours up in the tree, which comes to less than a hundred feet of lights per hour.  That they were cold days did not help.  I wanted to wear gloves but had to keep taking them off to get the wires wrapped neatly.

Cost:

$ 310 lights
$ 12 extension cord
$ 25 deer netting to wrap around everything within 8' of the ground, to discourage vandals.

$ 347 total.

The results:

Looking up into tree, day.

DSCN0076.thumb.jpg.ad6a468229eea6a60fbaf54c5e68bced.jpg

 

Looking up at tree, night.DSCN0081.thumb.jpg.c35f7963c72c0f6f3523e528cbef76e1.jpg

Tree from a distance, day.
DSCN0075.thumb.jpg.a2c24331d90864c413376ba4daf5540b.jpg

Tree from a distance, night.DSCN0082.thumb.jpg.d729f9999cdcfae9c90229fd5a3e5bf1.jpg

DSCN0080.jpg

In conclusion, it does look good, but the tree could probably hold two cases (1,100') of lights and look even better.

Edited by sparkleball
  • Like 2

Share this post


Link to post
Share on other sites

Congrats for doing it your first time and it looks fantastic by the way! I applaud your efforts on the entire process.  I too love that tree !

Are you planning on leaving the lights up all year?

 

I just caught this in the video. I sure hope that's a waterproof extension box!!

 

Screenshot_7.jpg

Edited by diamondkilo
updated

Share this post


Link to post
Share on other sites

Sparkleball:   Congrats; the tree looks great.  And you are correct:  trees can be real light hogs.

Share this post


Link to post
Share on other sites
On 11/10/2018 at 4:18 PM, diamondkilo said:

Are you planning on leaving the lights up all year?

 

No, the tree is actively growing and I'm only going to have it lit for one month.  I think they would age a lot sitting out in the weather for eleven months waiting for next December.

 

 

On 11/11/2018 at 12:45 PM, Fodstar said:

 you are correct:  trees can be real light hogs.

Next year: another $300 worth of lights...(MUAHAHA!)

 

Share this post


Link to post
Share on other sites

Great job and you're smart for taking them down after one month.  It's always a hit and miss on leaving them up for a year, especially if you get a lot of rain during the next year.  I will say way back when I was using Incandescent  and I could get them dirt cheap after Christmas, I did leave them up in my big Sycamore.  They lasted for four years that way!

Share this post


Link to post
Share on other sites

Looks good. My new house has wrap worthy trees. I'll be interested to see how they light up Thursday. Haven't tested at night yet.

Sent from my SM-S903VL using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×